APC BX950MI-FR uninterruptible power supply (UPS) Line-Interactive 0.95 kVA 520 W 4 AC outlet(s)
Product information
Technical specifications
| Sustainability certificates | RoHS |
| Ethernet LAN (RJ-45) ports | 2 |
| USB port type | USB Type-B |
| USB 2.0 ports quantity | 1 |
| USB port | Yes |
| AC outlets quantity | 4 AC outlet(s) |
| Power plug | Type F |
| AC outlet types | Type E |
| Weight | 6.1 g |
| Height | 160 mm |
| Depth | 355 mm |
| Width | 120 mm |
| Operating altitude | 0 - 3000 m |
| Operating relative humidity (H-H) | 0 - 95 % |
| Storage temperature (T-T) | -15 - 40 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Package weight | 6.6 g |
| Package height | 250 mm |
| Package depth | 430 mm |
| Package width | 197 mm |
| Manual | Yes |
| Cables included | Input power cable |
| Battery recharge time | 8 h |
| Battery life (max) | 2 year(s) |
| Typical backup time at half load | 6.5 min |
| Typical backup time at full load | 1 min |
| Battery technology | Sealed Lead Acid (VRLA) |
| Certification | CB Meet EN62040-1 / CE / IEC-62040-1 / IEC-62040-2 |
| International Protection (IP) code | IP20 |
| LED indicators | Yes |
| Product colour | Black |
| Cable length | 1.2 m |
| Form factor | Compact |
| Audible alarm modes | Low battery alarm |
| Audible alarm(s) | Yes |
| Surge protection | Yes |
| Noise level | 40 dB |
| Input power factor | 0.54 |
| Response time | 6 ms |
| Automatic Voltage Regulation (AVR) | Yes |
| Output voltage regulation | 10 % |
| Output frequency regulation | 0.5 Hz |
| Output frequency | 50/60 Hz |
| Output operation voltage (max) | 230 V |
| Output operation voltage (min) | 230 V |
| Input frequency | 50/60 Hz |
| Input operation voltage (max) | 300 V |
| Input operation voltage (min) | 140 V |
| Waveform | Sine |
| Output power | 520 W |
| Output power capacity | 0.95 kVA |
| UPS topology | Line-Interactive |
Description
Automatic Voltage Regulation (AVR)
Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
PowerChute Personal Edition OS Compatibility
This software supports numerous operating systems and processors.
USB connection
Use your PC to access additional power protection and management features for your UPS via a USB Port.
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment