10/100M, 9VDC / 0.6A, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

TP-LINK TL-WA801ND wireless access point 300 Mbit/s White Power over Ethernet (PoE)

Product information

Technical specifications

Ethernet LAN (RJ-45) ports 1

Height 36 mm
Depth 125 mm
Width 181 mm

Input current 0.6 A
Input voltage 9 V
Power over Ethernet (PoE) Yes

Storage relative humidity (H-H) 5 - 90 %
Storage temperature (T-T) -40 - 70 °C
Operating temperature (T-T) 0 - 40 °C
Operating relative humidity (H-H) 10 - 90 %

Management protocols SNMP

AC adapter included Yes

MAC address filtering Yes
Security algorithms 64-bit WEP,128-bit WEP,152-bit WEP,SSID,WPA,WPA-PSK,WPA2,WPA2-PSK,WPS

Antenna connector type RP-SMA
Antenna gain level (max) 5 dBi
Antennas quantity 2
Antenna features Detachable antenna
Antenna direction type Omni-directional
Antenna type External

Certification CE, FCC, RoHS
LED indicators Yes
Reset button Yes
Product colour White
Placement Table, Wall

Receiver sensitivity 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER
Quality of Service (QoS) support Yes
Modulation 16-QAM,64-QAM,CCK,DBPSK,DQPSK,OFDM
Cabling technology 10/100Base-T(X)
Networking standards IEEE 802.11b,IEEE 802.11g,IEEE 802.11n
Frequency band 2.4 - 2.4835 GHz
Ethernet LAN data rates 10,100 Mbit/s
Maximum data transfer rate 300 Mbit/s
5 GHz No
2.4 GHz Yes

Description

What This Product Does
The TP-LINK Wireless N Access Point TL-WA801ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The APs support a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.

Wireless N - Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through two antennas to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!

Multiple Operating Modes
- Easy to Build WLAN

Supports multiple operation modes (Access Point, Multi-SSID, Client, Universal/ WDS Repeater, Bridge with AP) to enable various wireless applications to give users a more dynamic and comprehensive experience when using their AP. Multiple operating mode also helps you easily to build wireless network for hard-to-wire locations or eliminating wireless dead zone.

Passive PoE Supported
- More Flexible Deployment

The TL-WA801ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.

Highlights

  • 300Mbps wireless speed ideal for smooth HD video, voice streaming and online gaming*
  • Supports multiple operation modes: Access Point, Multi-SSID, Client, Universal/WDS Repeater, Bridge with AP
  • Easily setup a WPA encrypted secure connection at a push of the WPS button
  • Up to 30 meters (100 feet) of flexible deployment with included Passive Power over Ethernet Injector