TP-LINK TL-WA901ND wireless access point 450 Mbit/s White Power over Ethernet (PoE)
Product information
Technical specifications
| DC-in jack | Yes |
| WAN connection | Ethernet (RJ-45) |
| Ethernet LAN (RJ-45) ports | 1 |
| Height | 36.2 mm |
| Depth | 129.9 mm |
| Width | 194.8 mm |
| Power consumption (typical) | 5.8 W |
| Input current | 1 A |
| Input voltage | 12 V |
| Power over Ethernet (PoE) | Yes |
| Storage relative humidity (H-H) | 5 - 90 % |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| DHCP server | Yes |
| Quick start guide | Yes |
| CD manual | Yes |
| Cables included | LAN (RJ-45) |
| PoE adapter included | Yes |
| AC adapter included | Yes |
| Service Set Identifier (SSID) features | SSID broadcast on/off |
| MAC address filtering | Yes |
| Security algorithms | 64-bit WEP,128-bit WEP,152-bit WEP,WPA,WPA2,WPA2-PSK |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 5 dBi |
| Antennas quantity | 3 |
| Antenna features | Detachable antenna |
| Antenna direction type | Omni-directional |
| Antenna type | External |
| Certification | CE, FCC, RoHS |
| LED indicators | Yes |
| WPS push button | Yes |
| Reset button | Yes |
| On/off switch | Yes |
| Product colour | White |
| Placement | Table, Wall |
| Receiver sensitivity | 270M: -68dBm@10% PER 130M: -68dBm@10% PER 108M: -68dBm@10% PER 54M: -68dBm@10% PER 11M: -85dBm@8% PER 6M: -88dBm@10% PER 1M: -90dBm@8% PER |
| Quality of Service (QoS) support | Yes |
| Networking standards | IEEE 802.11b,IEEE 802.11g,IEEE 802.11n |
| Frequency band | 2.4 - 2.4835 GHz |
| Ethernet LAN data rates | 10,100 Mbit/s |
| Maximum data transfer rate | 450 Mbit/s |
| 5 GHz | No |
| 2.4 GHz | Yes |
Description
What This Product Does
The TP-LINK Wireless N Access Point TL-WA901ND is designed to establish or expand a scalable high-speed wireless N network or to connect multiple Ethernet enabled devices such as game consoles, digital media adapters, printers, or network attached storage devices to a wireless network. The AP supports a host of different functions that makes your wireless networking experience more flexible than ever before. Now, you can enjoy a better Internet experience when downloading, gaming, video streaming or with any other application that you may wish to use.
Wireless N Speed & Range
Adopting IEEE 802.11n advanced MIMO (Multi Input Multi Output) technology, it simultaneously works through three antennas with smart antenna technology to Tx and Rx to overcome the interference and signal degradation when traveling long distances or through physical barriers in a small office or a large apartment, resulting in an incredible improvement in the wireless performance, even in a steel-and-concrete building. Above all, you could easily pick up the wireless network during long-distance connection where legacy 11g products may not!
Multiple Operating Modes
- Easy to Build WLAN
Supports AP Client, Bridge, Repeater and AP operation modes to enable various wireless applications to give users a more dynamic and comprehensive experience when using your AP. Multiple operating mode also helps you easily build wireless network for hard-to-wire locations or eliminating wireless dead zone.
Passive PoE Supported
-More Flexible Deployment
The TL-WA901ND is able to be powered using an Ethernet cable to simultaneously send data and electricity to wherever your AP may be located even up to 100 feet away. This feature multiplies your options allowing you to place the AP in a position that is most convenient to get the best signal possible, such as on the wall or on the ceiling of your office.
Highlights
- 450Mbps wireless transmission rate, brings smooth wireless N experience*
- Supports multiple operating modes: Access Point, Client, Universal/ WDS Repeater, Wireless Bridge
- Easily setup a WPA-PSK/WPA2-PSK encrypted secure connection at a push of the WPS button
- Up to 30 meters (100 feet) of flexible deployment with included Power over Ethernet Injector